|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
HMC546LP2 / 546LP2E v00.0506 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Typical Applications The HMC546LP2 / HMC546LP2E is ideal for: * LNA Protection, WiMAX, WiBro * Cellular/PCS/3G, TD-SCDMA Infrastructure * Private Mobile Radio and Public Safety Handsets Features High Input P0.1 dB: +40 dBm Tx Low Insertion Loss: 0.4 dB High IIP3: +67 dBm Positive Control: 0/+3V to 0/+8V Failsafe Operation - Tx "On" When Unpowered 8 SWITCHES - SMT * Automotive Telematics Functional Diagram General Description The HMC546LP2 & HMC546LP2E are failsafe SPDT switches in leadless DFN surface mount plastic packages for use in transmit-receive, and LNA protection applications which require very low distortion and high power handling of up to 10 watts. The device can control signals from 200 - 2700 MHz* and is especially suited for WiMAX and WiBro repeaters, PMR and automotive telematic applications. The design provides exceptional P0.1 dB of +40 dBm and +65 dBm IIP3 on the Transmit (Tx) port. The failsafe topology allows the switch to provide a low loss path from RFC to Tx, when no DC power is available. Electrical Specifications, TA = +25C, Vctl = 0/+3 Vdc, 50 Ohm System* Parameter Frequency Range Insertion Loss Isolation Return Loss Input Power for 0.1 dB Compression Input Third Order Intercept (Two-tone input power = +19 dBm each tone) Switching Characteristics Tx - RFC RFC - Rx Tx - RFC RFC - Rx Tx - RFC RFC - Rx Tx - RFC RFC - Rx Tx - RFC Vctl = 0/+3V RFC - Rx Tx - RFC Vctl = 0/+5V RFC - Rx tRISE, tFALL (10/90% RF) tON, (50% CTL to 90% RF) tOFF (50% CTL to 10% RF) 38 19 15 22 Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max Units MHz dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm ns ns ns 1805 - 1910 0.3 0.4 23 30 25 25 40 21 65 33 66 44 21 102 36 39 19 0.6 0.7 15 20 2010 - 2025 0.4 0.3 22 27 20 25 41 21 64 32 64 45 21 102 36 36.5 17 0.7 0.6 15 25 2300 - 2480 0.6 1.1 20 30 22 10 38.5 19 67 33 67 45 21 102 36 38.5 18 0.8 1.5 10 30 2500 - 2700 0.5 0.7 15 40 20 12 40.5 20 62 32 62 43 21 102 36 0.8 1.1 TA = +25 C, Vctl & Vdd Unpowered Insertion Loss Isolation Return Loss Input Power for 0.1 dB Compression Tx - RFC RFC - Rx Tx - RFC Tx - RFC 38 15 0.3 23 25 40 39 0.6 15 0.4 22 20 41 36.5 0.7 15 0.6 20 22 38.5 38.5 0.8 10 0.5 15 20 40.5 0.8 dB dB dB dBm * Specifications and data reflect HMC546LP2 measured using the respective application circuits for each designated frequency band found herein 8 - 288 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC546LP2 / 546LP2E v00.0506 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Insertion Loss vs. Temperature, Rx with 1843 MHz Tuning 0 -0.5 INSERTION LOSS (dB) -1 Tx, +25C Insertion Loss vs. Temperature, Tx with 1843 MHz Tuning 0 -0.5 INSERTION LOSS (dB) -1 Tx, +25C -1.5 -2 -2.5 -3 1.75 Tx, +85C Tx, -40C -1.5 -2 -2.5 -3 1.75 Tx, +85C Tx, -40C 8 1.9 1.95 1.8 1.85 FREQUENCY (GHz) 1.9 1.95 1.8 1.85 FREQUENCY (GHz) Isolation with 1843 MHz Tuning 0 -5 Return Loss with 1843 MHz Tuning 0 -5 RETURN LOSS (dB) Tx, Input Tx, Output Rx, Input Rx, Output -10 ISOLATION (dB) -15 -20 -25 -30 -35 -40 -45 1.75 RFC to Tx RFC to Rx -10 -15 -20 -25 -30 -35 -40 1.75 1.8 1.85 FREQUENCY (GHz) 1.9 1.95 1.8 1.85 FREQUENCY (GHz) 1.9 1.95 Input IP3 vs. Voltage with 1843 MHz Tuning 75 70 65 60 IIP3 (dBm) 55 50 45 40 35 30 25 20 3 4 5 6 7 8 VOLTAGE (Vdc) RFC to Tx RFC to Rx For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 289 SWITCHES - SMT HMC546LP2 / 546LP2E v00.0506 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Insertion Loss vs. Temperature, Rx with 2015 MHz Tuning 0 -0.5 INSERTION LOSS (dB) -1 -1.5 -2 -2.5 -3 1.9 Insertion Loss vs. Temperature, Tx with 2015 MHz Tuning 0 -0.5 INSERTION LOSS (dB) -1 -1.5 -2 -2.5 Tx, +25C Tx, +85C Tx, -40C Rx, +25C Rx, +85C Rx, -40C 8 SWITCHES - SMT -3 1.9 1.95 2 FREQUENCY (GHz) 2.05 2.1 1.95 2 FREQUENCY (GHz) 2.05 2.1 Isolation with 2015 MHz Tuning 0 -5 ISOLATION (dB) -10 -15 -20 -25 -30 -35 1.9 RFC to Tx RFC to Rx Return Loss with 2015 MHz Tuning 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 -35 1.9 Tx, Input Tx, Output Rx, Input Rx, Output 1.95 2 FREQUENCY (GHz) 2.05 2.1 1.95 2 FREQUENCY (GHz) 2.05 2.1 Input IP3 vs. Voltage with 2015 MHz Tuning 75 70 65 60 IIP3 (dBm) 55 50 45 40 35 30 25 20 3 4 5 6 7 8 VOLTAGE (Vdc) RFC to Tx RFC to Rx 8 - 290 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC546LP2 / 546LP2E v00.0506 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Insertion Loss vs. Temperature, Rx with 2350 MHz Tuning 0 -0.5 INSERTION LOSS (dB) -1 -1.5 Rx, +25C Insertion Loss vs. Temperature, Tx with 2350 MHz Tuning 0 -0.5 INSERTION LOSS (dB) -1 Tx, +25C -1.5 -2 -2.5 -3 2.3 Tx, +85C Tx, -40C -2 -2.5 -3 2.3 Rx, +85C Rx, -40C 8 2.45 2.5 2.35 2.4 FREQUENCY (GHz) 2.45 2.5 2.35 2.4 FREQUENCY (GHz) Isolation with 2350 MHz Tuning 0 -5 -10 ISOLATION (dB) -15 -20 -25 -30 -35 -40 -45 2.3 RFC to Tx RFC to Rx Return Loss with 2350 MHz Tuning 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 -35 2.3 Tx, Input Tx, Output Rx, Input Rx, Output 2.35 2.4 FREQUENCY (GHz) 2.45 2.5 2.35 2.4 FREQUENCY (GHz) 2.45 2.5 Input IP3 vs. Voltage with 2350 MHz Tuning 75 70 65 60 IIP3 (dBm) 55 50 45 40 35 30 25 20 3 4 5 6 7 8 VOLTAGE (Vdc) RFC to Tx RFC to Rx For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 291 SWITCHES - SMT HMC546LP2 / 546LP2E v00.0506 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Insertion Loss vs. Temperature, Rx with 2600 MHz Tuning 0 -0.5 INSERTION LOSS (dB) -1 -1.5 Rx, +25C Insertion Loss vs. Temperature, Tx with 2600 MHz Tuning 0 -0.5 INSERTION LOSS (dB) -1 Tx, +25C -1.5 -2 -2.5 Tx, +85C Tx, -40C 8 SWITCHES - SMT -2 -2.5 -3 2.5 Rx, +85C Rx, -40C -3 2.5 2.55 2.6 FREQUENCY (GHz) 2.65 2.7 2.55 2.6 FREQUENCY (GHz) 2.65 2.7 Isolation with 2600 MHz Tuning 0 -5 ISOLATION (dB) -10 -15 -20 -25 -30 -35 2.5 RFC to Tx RFC to Rx Return Loss with 2600 MHz Tuning 0 -5 RETURN LOSS (dB) -10 -15 -20 -25 -30 -35 -40 2.5 Tx, Input Tx, Output Rx, Input Rx, Output 2.55 2.6 FREQUENCY (GHz) 2.65 2.7 2.55 2.6 FREQUENCY (GHz) 2.65 2.7 Input IP3 vs. Voltage with 2600 MHz Tuning 75 70 65 60 IIP3 (dBm) 55 50 45 40 35 30 25 20 3 4 5 6 7 8 VOLTAGE (Vdc) RFC to Tx RFC to Rx 8 - 292 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC546LP2 / 546LP2E v00.0506 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Absolute Maximum Ratings 3V Max. CW Input Power Max Channel Temp. Thermal Resistance Continuous Dissipated Power Supply Voltage (Vdd) Control Voltage Range (Vctl) Storage Temperature Operating Temperature ESD Sensitivity (HBM) Tx Port Rx Port Tx Port Rx Port Tx Port Rx Port 40 dBm 24 dBm 150 C 54 C/W 68 C/W 1.12 W 73 mW +10 Vdc -0.2 to Vdd + 1.0 Vdc -65 to +150 C -40 to +85 C Class 1A 5V 40 dBm 29 dBm 150 C 54 C/W 86 C/W 1.12 W 232 mW Truth Table Control Input Vctl 0.0 Vdd 0 High Z Vdd Vdd Vdd 0 High Z Signal Path State RFC To Tx OFF ON ON ON RFC to Rx ON OFF OFF OFF Vdd = +3.0V to +8.0V Control Input Voltage Tolerances are 0.2 Vdc. DC blocking capacitors are required at ports RFC, Tx and Rx. 8 SWITCHES - SMT 8 - 293 ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE. 4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM. 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED LAND PATTERN. Package Information Part Number HMC546LP2 HMC546LP2E Package Body Material Low Stress Injection Molded Plastic RoHS-compliant Low Stress Injection Molded Plastic Lead Finish Sn/Pb Solder 100% matte Sn MSL Rating MSL1 MSL1 [1] Package Marking [3] 546 XXX 546 XXX [2] [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC546LP2 / 546LP2E v00.0506 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Pin Descriptions Pin Number 1 Function Tx Description This pin is DC coupled and matched to 50 Ohms. Interface Schematic 8 SWITCHES - SMT 2 Vctl See Truth Table. 3 ACG External capacitor to ground is required. See application circuit herein. 4 Rx This pin is DC coupled and matched to 50 Ohms. 5 Vdd Supply Voltage 6 RFC This pin is DC coupled and matched to 50 Ohms. GND Package bottom has exposed metal paddle that must be connected to PCB RF ground. 8 - 294 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC546LP2 / 546LP2E v00.0506 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Application Circuit 8 SWITCHES - SMT 2015 MHz 115201 330 pF 0.8 pF N/A 2.4 pF 4.3 nH [4] 3.9 nH 2350 MHz 115202 330 pF 1.2 pF N/A 2.0 pF 2.0 nH [4] 2.4 nH 2600 MHz 115203 330 pF 0.7 pF N/A 1.5 pF 1.6 nH [3] 2.7 nH Components for Selected Frequencies Tuned Frequency Evaluation PCB Number C1, C3, C5 [1] C2 [2] C6 [2] C7 [2] L1 L2 [4] [1] DC blocking capacitors [2] ATC 0402 capacitors [3] Coilcraft 0603 inductor, 5% tolerance [4] Coilcraft 0402 inductor, 5% tolerance 1843 MHz 110782 330 pF 1.2 pF 0.5 pF 3.0 pF 5.1nH [4] 4.3 nH For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 295 HMC546LP2 / 546LP2E v00.0506 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Evaluation PCB 8 SWITCHES - SMT List of Materials for Evaluation PCB [1] Item J1 - J3 J4 - J6 C1 - C3 [2] L1 - L2 [2] U1 PCB [3] Description PCB Mount SMA RF Connector DC Pin Capacitor, 0402 Pkg. Inductor, 0402 or LP2 0603 Pkg. HMC546LP2 / HMC546LP2E T/R Switch 108992 Evaluation PCB [1] When requesting an evaluation board, please reference the appropriate evaluation PCB number listed in the table "Components for Selected Frequencies." [2] Please refer to `Components for Selected Frequencies' table for values. [3] Circuit Board Material: Rogers 4350 The circuit board used in the final application should be generated with proper RF circuit design techniques. Signal lines at the RF port should have 50 ohm impedance and the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown above. The evaluation circuit board shown above is available from Hittite Microwave Corporation upon request. 8 - 296 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC546LP2 / 546LP2E v00.0506 GaAs MMIC 10W FAILSAFE SWITCH 0.2 - 2.7 GHz Notes: 8 SWITCHES - SMT For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 8 - 297 |
Price & Availability of HMC546LP2 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |